SFT10 Lever Float Steam Trap
Applications
1. The steam transmission pipeline guide.
2. Small heat exchanger and kettle.
3. Heat tracing system (high back pressure recovery system)
4. The coil is heated by air.
Material
|
Cap |
A105 |
|
Valve Body |
WCB |
|
Seat |
Stainless Steel |
|
Disc |
Stainless Steel |
|
Other Internals |
Stainless Steel |
Data Size Table
|
Type |
Conn |
DN |
PN |
Working Pressure MPa |
Temperature°C Pressure MPa |
Diameter (mm) |
U.W Kg |
|||
|
L |
H |
H1 |
W |
|||||||
|
SFT 10T |
Thread |
15-25 |
25 |
0.05-1.6 |
400/1.57 |
150 |
120 |
60 |
170 |
5.5 |
|
SFT 10W |
SW |
15-25 |
25 |
0.05-1.6 |
400/1.57 |
150 |
120 |
60 |
170 |
5.5 |
|
SFT 10F |
RF |
15-25 |
25 |
0.05-1.6 |
400/1.57 |
210 |
120 |
60 |
170 |
8 |
1. The working principle of the lever float steam trap is based on the density of vapor and liquid.
2. The valve body and bonnet are made of cast steel/forged steel.
3. All internal parts are made of stainless steel,and the wear allowance has been fully considered in the design of movable parts, which improves the service life of the trap.
4. Special flow channel design to achieve zero water hammer.
5. Patented flexible closing system and micron-level precision closing system double guarantee no steam leakage and long service life.
6. Built-in air exhaust valve to prevent steam lock.
7. The independent filter makes the trap work in a clean environment.
8. Choose different displacement curves according to the pressure.
9. The back pressure rate is as high as 95%
10. The drain plug is designed at the bottom of the trap to ensure that the internal water is removed after stopping,to prevented floating ball from freezing in cold weather.
Welcome to our website. If you have any requests or suggestions,please feel free to email us at vmv@steamvalves.com or use the following enquiry form. Please allow us to provide you with the best service.
